MASTER DIGITAL SPI SHD LED strips

Dynamically controlled LED pixels, with very high dense LEDs (248x/m) are especially suitable for very low profile diffused architectural and sculpture lighting. Superior density allows almost dot-free lighting from about 1m even without diffusers, thus moving the whole lighting to very new dimension. This very dense LED strip is especially suitable for all glass sculpture lighting application. Its high power is able to deliver great lighting peaks, which will attract many customers from larger distance than lower powered strips. That is why this LED strip is beeing developed in 2 power factors : deco (6.2W per each color if all pixels are ON) and POWER (20W per colour if all LEDs are ON) Please note : for best lifetime and parameters, it is highly advised not to run : each pixel on more than 100% of 1 colour at a time, or design a custom effects which will make sure if certain LEDs and more than 1 colour will be 100% bright , the other LEDs will be off or dimmed to much lower value. This way you will make sure, the great power allowed in the LED strips will not affect the whole instalaltion and its current and thermall limits.


CE logo prooves our products are certified and made in EU

Order code Colour El. power LEDs/m

MASTER-DIGITAL-SPI-SHD-RGB-DECO RGB Multicolour 19.6W/m @ max 248x

MASTER-DIGITAL-SPI-SHD-RGB-POWER RGB Multicolour 60W/m @ max 248x

Files to download

Please note : This product is covered by 2-years warranty only , as it doesn't contain our warranty covered LEDs (OSRAM , LumiLEDs, Samsung, Seoul Semiconductor, etc).
As this product is very very powerfull, to align with our warranty policy you should ALWAYS design your scene and installation to protect the LEDs from overheating/overcurrents, etc :

  • never exceed maximum continuous current per path 3A (peaks max. 4A)

  • temperature on Tj point should never exceed 40°C

  • good practices are : if more than 1 colour will be ON at a time, make sure it will be only for very short time, not all LEDs will be ON, use sufficient no. of power injectors to keep the voltage between 4.3V and 5.1V, mount the LED strip on ALU profile/heatsink.

  • You need to amend your digital scene so it is working always within safe limits and best practises in segment.