MASTER DIGITAL SPI MONO96 LED strips, 24V, 1pixel=1LED
Dynamically controlled LED pixel strips, with very high power of upto 83W/m and very dense high voltage LEDs (96x/m) are especially suitable for very low profile diffused architectural and sculpture lighting with very high Lm flux to attract everybody's focus. Superior power and high density allows almost dot-free lighting from about 2-3m even without diffusers, thus moving the whole lighting to very new dimension. This very powerfull LED strips are especially suitable for all glass sculpture lighting application. Its high power is able to deliver great lighting peaks, which will attract many customers from larger distance than lower powered 5V strips. The LED strip has implemented external IC with protocol TM1814 allowing to controll upto 4 monochromatic LEDs per segment, each LED with driving current of 18mA/ LED in standard mode or 38mA / LED in Boost mode (software boost). Please note : for best lifetime and parameters, it is highly advised to design your custom effects in a wise way not to power up all LEDs on 100%, as you will face several problems with heat management, power management, Voltage drop, etc. The Great top power limit, please use for :sparkling effects mainly. This way you will make sure, the great power allowed in the LED strips will not affect the whole installation and its current and thermall limits.
Order code Spectral properties Protocol Power (@Standard) power (@Boost)W
MASTER-DIGITAL-SPITM-MONO96-24V-W827 CRI80+, 2700K, Warm white TM1814 41,5W / 3400Lm/m 83W / 6800Lm/m
MASTER-DIGITAL-SPITM-MONO96-24V-W830 CRI80+, 3000K, Warm white TM1814 41,5W / 3500Lm/m 83W / 6900Lm/m
MASTER-DIGITAL-SPITM-MONO96-24V-W840 CRI80+, 4000K, Neutral white TM1814 41,5W / 3800Lm/m 83W / 7500Lm/m
MASTER-DIGITAL-SPITM-MONO96-24V-W850 CRI80+, 5000K, Cold white TM1814 41,5W / 3900Lm/m 83W / 7700Lm/m
MASTER-DIGITAL-SPITM-MONO96-24V-W857 CRI80+, 5700K, Cold white TM1814 41,5W / 3900Lm/m 83W / 7700Lm/m
Files to download
Please note : Due to product's super high power the product is covered by 5-years warranty only if the following details are met :
never exceed maximum continuous current per path 6A (<1s peaks max. 8A)
temperature on Tj point should never exceed 50°C even for short period
You need to amend your digital scene so it is working always within safe limits and best practises in segment. (it is prohited to power up everything to 100% or to power up the LED strip with no SPI data attached.
Product contains a DEMO scene if no SPI data are present, which might be in certain situations an issue (disconnecting SPI data will start the demo sequence, which might cause overcurrent/overheat when long lines are powered)
Please read a MASTER technical advices and MASTER installation manuals before first installation.